A wetland filter uses mechanical and biological filtration to help clean pond water while blending into the surrounding landscape. Water moves slowly through the system, allowing suspended solids to settle before the water passes through biological filtration media and returns to the pond.
The idea comes directly from natural wetlands. In nature, wetlands slow moving water, collect sediment and use biological processes to remove nutrients from the water. A constructed wetland filter applies those same basic principles to a backyard pond or larger water feature.
Wetland filtration can be especially useful when you need more filtration capacity, have a larger pond or heavier fish load, or want filtration that becomes part of the landscape rather than equipment that needs to be hidden.

How Does a Wetland Filter Work?
A wetland filter doesn't rely on one type of filtration. Instead, several processes happen as water moves through the system.
1. Water Slows Down and Solids Settle
Water enters the bottom of the wetland through the Pit Viper® 2.0 diffuser modules, which distribute water laterally across the system.
As water moves into the open space created by PRO-Blox™, its velocity decreases. This gives heavier suspended solids an opportunity to settle rather than continuing through the pond.
The PRO-Blox also provide structural support for the filtration layers above while maintaining open space for water movement and debris collection.
The organic solids are consumed by the beneficial bacteria in the wetland filter
2. Biological Filtration Takes Place
From the lower settling area, water moves upward through EasyBog™ Cubes.
These cubes contain filtration media that provide a large amount of surface area for beneficial bacteria. As water passes through, the bacteria continue to process waste and nutrients within the pond system.
EasyBog Cubes also provide mechanical filtration, capturing suspended material as water moves through the media.
Using lightweight filtration modules in place of traditional layers of rock can reduce the amount of gravel, rock, and heavy difficult to clean material needed during installation while providing substantial biological filtration capacity.
3. The Water Is Polished Before Returning to the Pond
After passing through the EasyBog Cubes, water continues upward through a mesh layer and approximately six inches of gravel.
This final layer helps capture additional suspended particles before the filtered water returns to the pond, often through a stream, waterfall or landscaped wetland edge.
The combination of settling, biological filtration and final water polishing allows a wetland filter to perform several filtration jobs within one system.

What Is the Difference Between a Wetland Filter and a Waterfall Filter?
Both wetland filters and waterfall filters are designed to filter pond water, but they accomplish that job differently.
A waterfall filter, such as an AquaFalls™, can provide filtration in a relatively compact footprint. That's useful when space is limited or the pond doesn't require the capacity of a larger wetland.
Wetland filters generally provide more biological surface area and longer water contact time. Because the water moves more slowly through a larger filtration area, there's more opportunity for solids to settle and biological filtration to take place.
That doesn't make one inherently better than the other. The right choice depends on the pond.
A smaller backyard pond with limited space may be well suited to a waterfall filter. A larger pond, heavier fish load or project with room to incorporate filtration into the landscape may benefit from a wetland.

What Are the Benefits of a Wetland Filter?
One of the biggest advantages of wetland filtration is its ability to scale.
Instead of being limited to the capacity of a single filter box, a modular wetland can be designed around the needs of the pond. EasyPro wetland systems have been used on projects ranging from backyard ponds to half-acre and acre-sized water features.
Wetland filtration also offers several other advantages.
High Biological Filtration Capacity
The large amount of surface area within the wetland supports biological filtration throughout the system.
That can make wetlands particularly useful for larger ponds and ponds with heavier fish loads.
Filtration That Becomes Part of the Landscape
A wetland doesn't have to look like filtration equipment.
It can be planted and landscaped to look like a natural extension of the pond, a shallow wetland area or even the beginning of a stream.
Instead of trying to hide a large filter or exposed plumbing, the filtration can become part of the water feature itself.
A System That Can Grow With the Project
Modular construction allows a wetland to be sized according to the needs of the pond rather than forcing the pond to fit a predetermined filter size.
This becomes especially useful on large or unusually shaped projects where filtration requirements extend beyond a typical backyard water garden.
How Have Wetland Filters Changed?
Wetland filtration isn't new, but the way these systems are built has changed considerably.
Traditional constructed wetlands could require pits four or five feet deep filled with graduated layers of stone. That meant extensive excavation, large quantities of heavy rock and a system that could be difficult to clean once debris accumulated.
Modern wetland systems can accomplish the same basic filtration goals with a shallower design that’s easier to maintain.
As Jake covers in the video, excavation can be roughly three feet deep, filtration media in the EasyBog Cubes replaces much of the rock traditionally required, and only about six inches of gravel is needed over the top to finish the system and integrate it into the landscape.
The components can also lock together during installation to create a stable platform as the wetland is constructed.
That means less excavation, less rock and a system designed with future maintenance in mind.

Do Wetland Filters Need to Be Cleaned?
Wetland filters are designed to be relatively low maintenance, but low maintenance doesn't mean no maintenance.
Over time, solids and debris can accumulate within the system. That's why designing a way to clean the wetland is important.
EasyPro's system can incorporate a cleanout vault at a low point in the wetland. When cleaning is needed, water can be flushed backward through the gravel and filtration media, moving accumulated debris into the void space below. A trash pump placed in the cleanout vault can then remove that material from the system.
The cleanout can also be configured around the project. It may remain easily accessible or be incorporated more discreetly into the finished landscape depending on the installer's design.
Is a Wetland Filter Right for My Pond?
A wetland filter can be a strong option when you want substantial biological filtration, have room to incorporate the filter into the landscape, or need a filtration system that can scale with a larger pond or heavier fish load.
But pond size alone shouldn't make the decision.
Consider:
-
The size and volume of the pond
-
Fish load
-
Available space
-
Desired flow rate
-
Landscape and design goals
-
Installation requirements
-
Maintenance access
-
How much filtration the pond needs
For smaller ponds or projects with limited space, a waterfall filter may make more sense. For larger systems where filtration capacity, scalability and natural appearance are priorities, wetland filtration becomes especially useful. Sometimes a combination approach is ideal.
EasyPro's team can also help contractors and pond owners work through the pros and cons of different filtration options based on the goals of a specific project. Whether you're building a new pond or upgrading an existing system, we're here to help you find the right fit.