[ivory-search id="25239" title="AJAX Search Form for WooCommerce"]

Subscribe Now for More Updates

PFM5 Nonwoven Material Product Specifications

Share now

1.0 Description

The PFM5 nonwoven material is constructed of polyester fibers in a textured nonwoven fabrication.

2.0 Properties

3.0 Use

This material is an OEM product used primarily as a component for biological and mechanical filtration units for ponds.

4.0 Construction

100% of the polyester fiber in the PFM5 nonwoven material comes from post consumer and industrial recycled waste. The primary source of this material is recycled water and soda bottles. Only water based latex resins are used in the manufacturing process. No phenol-formaldehyde resins are used in the binding process.

5.0 “Green” Initiative

  • Polyester fiber used in the material comes from 100% post consumer and industrial recycled waste product
  • Water based latex resins are used in the manufacturing process. No phenol-formaldehyde resins are used in the binding process.
  • Plant is operating under EPA approved clean air permit.

6.0 Product Care

To prolong the life of the PFM5 material, it is recommended that the product be stored indoors or wrapped in UV resistant packaging if stored outdoors.

7.0 Sizes

  • 56″ wide x 30 linear yards
  • 28″ wide x 30 linear yards

Note: Due to the intrinsic properties of the material and variable conditions of use, there may be slight variations in the specifications and results.