- Bactericide
- Fungicide
- Algaecide
- For indoor or outdoor uses.
ACTIVE INGREDIENT:
Sodium Carbonate Peroxyhydrate*…85.00%
Other Ingredients:……………………..15.00%
TOTAL:……………………………….100.00%
*CONTAINS 27.60% HYDROGEN DIOXIDE BY WEIGHT.
KEEP OUT OF REACH OF CHILDREN DANGER – PELIGRO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand this label, find someone to explain it to you in detail.)

EPA Registration No. 70299-15
EPA Establishment No.72797-AL-001, 067441-IL-001, 089546-NV-001
Manufactured by: BioSafe Systems, LLC
22 Meadow Street, East Hartford, CT 06108 Tel.: (888) 273-3088

This product is not intended as treatment against any public health organism for any use on this label.
Do not apply directly to treated, finished drinking water reservoirs or drinking water receptacles when the water is intended for human consumption.
Do not allow spray to drift from the application site and contact people or structures that people occupy.
FOR USE IN THE FOLLOWING WATER SITES:
Ponds, Lakes, Lagoons, Fish Ponds, Water Gardens, Stock Tanks, Livestock Watering Ponds, Watering Troughs, Livestock Watering Systems, Packinghouse Process Water Systems, Golf Course Ponds, Industrial/Commercial Ponds, Impounded Waters, Standing Water, Bilge Water, Reservoir Water, Waterways, Storm Waters, Drainage Systems, Conveyance Ditches, Canals, Laterals, Drainage Systems, Irrigation Systems, Irrigation Ponds, Catch Basins, Flooded Areas, Sewage Systems, Sewage Lagoons, Wastewater, Drain Fields, Fire Ponds, Nonpotable Watering Tanks, Non-potable Watering Systems, Storage Tanks, Non-potable Water Collectors and Domestic/Commercial Waters, NonChlorinated Swimming Areas, Rice Paddies and Fields
FOR USE ON THE FOLLOWING NON-PAINTED SURFACES:
Floors, Walkways, Storage Areas, Patios, Decks, Railings, Roofs, Farm Equipment, Post Harvest Equipment, Tools, Harvesting Equipment, Turf Equipment, Metal Structures, Greenhouse/Nursery Walkways, Industrial/
Commercial Facility Walkways, Floors, Walls, Greenhouse Benches, Fan Blades, Vats, Tanks, Coolers, Storage Rooms, Bins, Elevators, Storage Areas, Spray Equipment, Conveyors, Irrigation Systems, Asphalt Shingles, Siding, Fiberglass, Boats, Piers, Docks, Stairs, Ramps, Ground Cover Mats, Weed Control Mats, Animal Bedding and Litter, Concrete, Brick, Tile, Slate, Granite, Statues/Monuments, Outdoor Furniture, Tennis Courts (non-grass), Nursery Yards, Shorelines, Gravel, Dirt Floors, Under Benches, and Other Non-Painted Surfaces
AGRICULTURAL AND HORTICULTURAL USES:
Agricultural Commodities and Crops, Field Grown Crops, Tree Crops, Crops Grown in Commercial Greenhouses and Plastic Houses
APPLICATION RATES
Measuring GreenCleanPRO
One pound of granules is equivalent to one pound of tablets
Full Water Volume Rates:

Surface Water Volume Only Rates:
Apply GreenCleanPRO to the top surface of the water for treatment of suspended and free-floating algae mats and blooms.

GENERAL TREATMENT NOTES
Control is most easily achieved when algae are not yet well established. Treat when growth first begins to appear. This is especially important in the prevention of clogged irrigation systems, pumps,
filters etc.
- Apply early in the day under calm, sunny conditions, and when water temperatures are warm. Sunlight and higher temperatures both enhance GreenCleanPRO activity.
- Apply in a manner that will insure even distribution of GreenCleanPRO within the treatment area.
- Break up any heavy floating algae mats before or during application.
- Skim any dead algae and organic matter that rises to the water’s surface after treatment. Allowing dead organics to sink and decay will provide a food source and additional nutrients that stimulate algae re-growth and further blooms.
- If using in conjunction with other water additives (such as bacteria or
AERIAL:
Apply directly to water surface using conventional aerial application equipment. Avoiding spray drift at the application site is the responsibility of the applicator. The interactions of many equipment and weather-related factors determine the potential for spray drift. The applicator is responsible for considering all these factors when making decisions regarding application of this product.
SURFACE TREATMENT
Use GreenCleanPRO on all listed non-painted surfaces, to prevent and control algae, odor-causing bacteria, plant pathogens, moss, fungus, liverwort, molds, slime molds and their spores, and the odors and conditions that these organisms cause.
Use on surfaces and equipment: industrial/commercial facility walkways, greenhouse/nursery walkways, ground cloth, weed mats, floors, walls, on and under greenhouse benches, fan blades, watering systems, vats, tanks, coolers, storage rooms, bins, elevators, storage areas, spray equipment, conveyors, irrigation systems, trucks, and
related equipment. Use in areas that promote slippery conditions and slip hazards caused by algae and slime molds.
APPLICATION INSTRUCTIONS
POTS, FLATS, TRAYS AND CUTTING TOOLS: Use GreenCleanPRO to suppress / control the spread of plant pathogens, fungi and slime forming algae. Use ¼ lb. of GreenCleanPRO per gallon of clean water. Spray equipment thoroughly or soak tools to ensure complete coverage.
BENCHES AND WORK AREAS: Sweep and remove all plant debris. Use a power sprayer to wash all surfaces to remove loose dirt. Use ¼ lb. of GreenCleanPRO per gallon of clean water. Apply as a spray or
foam ensuring complete coverage. Scrub to remove heavy growths of algae and fungi.
DUMPSTER AND TRASH CAN TREATMENT: Use GreenCleanPRO to suppress/control odor-causing bacteria in dumpsters and trash cans. Sprinkle 1/8-1/4 lb. of GreenCleanPRO per 125 sq. ft. of surface area into the bottom of empty dumpster. Make applications over a damp surface or moisten with water immediately after treatment.
FOR HARD NON-POROUS, NON PAINTED SURFACES AND EQUIPMENT: Use GreenCleanPRO at a rate of 0.5 lb. to 2 lbs. per 1000 square feet of area to be treated. Apply as granular/tablets, liquid or foam, following Application Instructions below.
GENERAL TREATMENT NOTES
Control is most easily achieved when growth is not yet well established. Treat when growth first begins to appear.
- Apply in a manner that will insure even distribution of GreenCleanPRO
within the treatment area. - GreenCleanPRO is water activated. Watering before application is
preferred over misting after application because it prevents over
watering leading to a reduced effectiveness. - When treating soil, gravel or other similar media, apply and incorporate GreenCleanPRO to an inch below the surface line, for optimum
effectiveness. - Apply GreenCleanPRO at maintenance rates every 5-7 days or as
needed to control new or established conditions. - After application, do not allow undiluted granules/tablets to remain
in an area where humans or animals are exposed. - Non-target plants will suffer contact burn if undiluted granules/tablets are accidentally spilled on them. Do not apply in such a way that
the concentrated product comes in contact with grass, ornamentals
and other foliage. - Do not tank mix with aquatic herbicides or algaecides containing
copper or bromides. Always apply GreenCleanPRO at least one day
prior to the application of these products.
APPLICATION METHODS
SPREADING / BROADCASTING:
Broadcast GreenCleanPRO with a mechanical spreader or by hand. A
lawn spreader or any other applicator that will insure uniform coverage
is acceptable.
SPOT TREATMENT:
Apply GreenCleanPRO directly over algae covered area. Retreat when
heavy growth occurs.
LIQUID:
Make a solution with GreenCleanPRO (refer to liquid application rates
for mixing instructions). Spray this solution on the desired treatment
surface.
FOAM:
Make a solution with GreenCleanPRO (refer to foam application rates
for mixing instructions). Spray this solution on the desired treatment
surface. Use a foamer, such as the BioSafe BioFoamer, to apply.

PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS
DANGER: Corrosive. Causes irreversible eye damage. Harmful if swallowed, inhaled or absorbed through skin. Do not get in eyes, on skin or on clothing. Wash thoroughly with soap and water after handling. Remove and wash contaminated clothing before reuse.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Handlers who may be exposed to the dilute through application or other tasks must wear: long-sleeved shirt and long pants, and shoes plus socks. Handlers who may be exposed to the concentrate through mixing, loading, application, or other tasks must wear: coveralls over longsleeved shirt and long pants, rubber gloves, chemical resistant footwear plus socks, and protective eyewear (goggles or face shield). Follow manufacturer’s instructions for cleaning / maintaining PPE. Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. Do not reuse them. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry.

ENVIRONMENTAL HAZARDS
This pesticide is toxic to birds. This product is highly toxic to bees and other beneficial insects exposed to direct contact on blooming crops or weeds. Do not apply this product or allow it to drift to blooming crops or
weeds while bees are actively visiting the treatment area. Do not apply this product or allow it to drift to crops where beneficials are part of an integrated pest management strategy. Do not use near waterbody margins during amphibian breeding seasons.
PHYSICAL AND CHEMICAL HAZARDS:
Strong oxidizing agent. Corrosive. Do not bring in contact with other pesticides, cleaners or oxidative agents.
DIRECTIONS FOR USE:
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. For any requirements specific to your State or Tribe, consult the state or tribal agency responsible for pesticide regulation. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application.

WATER TREATMENT
Use GreenClean®PRO to treat, control, and prevent a broad spectrum of filamentous and planktonic blue-green algae, bacteria, and fungus. Effects of treatment are immediately apparent (bubbling, bleaching/
discoloration of algae or fungus, floating of dead organic matter). Waters treated with GreenCleanPRO are permissible to be used without interruption.
APPLICATION RATES
Measuring GreenCleanPRO
One pound of granules is equivalent to one pound of tablets.
1.0 lb. of GreenCleanPRO = 11 Scoops
1.0 Tbs. of GreenCleanPRO = 1/3 Scoop
1.0 tsp. of GreenCleanPRO = 1/10 Scoop
FOR STOCK TANKS AND LIVESTOCK WATER:
Use GreenCleanPRO to suppress / control algae, bacteria and fungi in stock tanks, stock watering ponds, tanks and troughs, and livestock water. Apply 2 to 10 tablespoons per thousand gallons of water.
Product can be simply added to the body of water, for even distribution throughout the water column. Apply GreenCleanPRO as needed to control and prevent algae growth; make applications more frequently in times of higher water temperatures. FOR AGRICULTURAL SPRAY IRRIGATION WATER, IRRIGATION
PONDS, DRAINAGE WATER AND DITCHES:
Use GreenCleanPRO to suppress / control algae, bacteria and fungi in agricultural irrigation waters, irrigation ponds and drainage water and ditches. Apply 2 to 10 tablespoons per thousand gallons of water.
Product can be simply added to the body of water, for even distribution throughout the water column.
FOR SEWAGE WATER TREATMENT:
Use GreenCleanPRO for the control of bacteria and malodors caused by hydrogen sulfide gas. Apply 50-250 lbs. of GreenCleanPRO per million gallons of water. For lagoons, wait 24 hours before adding
beneficial bacteria.
FOR ALGAE CONTROL IN RICE/ WILD RICE FIELDS AND PADDIES:
After the field has been flooded to a depth of 4-6 inches, apply 10-25 lbs. of GreenCleanPRO per acre as a broadcast or aerial spread by plane or other professional device at the first signs of algae.
Applications are most effective when made before algae rises to the water surface. Reapply as needed in accordance with General Treatment Notes.
DETERMINING WATER VOLUME
Measure length (L), width (W), and average depth (D) in feet (ft) or
meters (m) and calculate volume using one of the following formulas:
Square/Rectangular:
L(ft) x W(ft) x D(ft) x 7.5 = Gallons L(m) x W(m) x D(m) x 1000 = Liters
Circular/Elliptical:
L(ft) x W(ft) x D(ft) x 5.9 = Gallons L(m) x W(m) x D(m) x 786 = Liters
1 acre-foot of water =
- water measuring 208.7 ft long x 208.7 ft wide x 1 ft deep
- 43,560 cubic feet
- 325,851 gallons
- 2,780,000 pounds
Avg. Length (ft) x Avg. Width (ft) x Avg. Depth (ft)
43,560 = acre-feet of water
Avg. Length (ft) x Avg. Width (ft)
43,560 = acre
enzymes), always apply GreenCleanPRO first and wait several hours
before adding any other products.
- Re-treat areas if re-growth begins to appear. Allow 48 hours
between consecutive treatments. - In regions where water freezes in the winter, treatment with
GreenCleanPRO (including skimming) 6-8 weeks before expected
freeze will help prevent masses of decaying algae under the ice
cover. - After application, do not allow undiluted granules/tablets to remain
in an area where humans or animals are exposed. - Non-target plants will suffer contact burn if undiluted granules/tablets are accidentally spilled on them. Do not apply in such a way that
the concentrated product comes in contact with grass, ornamentals
and other foliage. - Do not tank mix with aquatic herbicides or algaecides containing
copper or bromides. Always apply GreenCleanPRO at least one day
prior to the application of these products. - 100 pounds of GreenCleanPRO per million gallons of water = 4ppm
of sodium. - Wait 24 hours before treating lagoons with beneficial bacteria.
EFFECTIVENESS FACTORS
- Effects of GreenCleanPRO treatment are immediately apparent
(bubbling, bleaching/discoloration of algae, floating dead organic
matter). - GreenCleanPRO treatments are successful when the product makes
contact with the algae. - Liquid applications will not sink through the water column as readily
as a granular/tablet application. - When treating surface mats and blooms, it is possible that
GreenCleanPRO will not penetrate the water column below the
infested area, and a second application is then required for treating
any bottom growing algae. - Apply more often during the summer months when water consumption and temperatures are high.
APPLICATION METHODS
When using an aerator to treat an entire water body, dose
GreenCleanPRO at the edges of the aerator turbulence, or in the
turbulence created by running the aerator to facilitate rapid and
adequate mixing.
SPREADING / BROADCASTING:
Broadcast GreenCleanPRO with a mechanical spreader or by hand,
directly on the water surface, from shore or a boat equipped with a
spreader.
SPOT TREATMENT:
Apply GreenCleanPRO directly over algae covered area. Retreat when
heavy growth occurs.
LIQUID:
Make a solution with GreenCleanPRO (refer to liquid application rates).
Spray this solution on the water surface from shore or a boat equipped
with aquatic spray equipment. If using slurry, agitate constantly.
INJECTION:
Make a solution with GreenCleanPRO (refer to liquid application rates).
Inject this solution into the water via a piping system.
SUBSURFACE:
Place GreenCleanPRO in burlap bags and drag through the water
along side or behind a boat. Use granular/tablets application rates.
Begin treatment along the shoreline, and proceed outward. Ensure the
path of the boat will allow an even distribution of product. Continue
dragging until all GreenCleanPRO is dissolved.


